Filter
Top Products
Chapter 2 Specifications
Page 14 STT8000A Product Manual
Regulatory compliance
The STT8000A complies with the regulations listed in the following table.
Agency Regulation
CSA
C22.2, No. 950-M89
TUV & IEC-RHEINLAND
EN 60 950/IEC 950
UL
1950
Canadian Dept. of Communications
Class B
EN55022 (CISPR-22)
with additional CE-Mark test requirements
Class B
FCC
Class B, Part 15
Use the STT8000A only in equipment where the combination has been determined
to be suitable by an appropriate certification organization (for example, Underwriters
Laboratories Inc. or the Canadian Standards Association in North America). You
should also consider the following safety points.
• Install the drive in an enclosure that limits the user's access to live parts, gives
adequate system stability, and provides the necessary grounding for the drive.
• Provide the correct voltages (+5 VDC and +12 VDC) based on the regulation
applied—Extra Low Voltage (SEC) for UL and CSA and Safety Extra Low
Voltage for BSI and VDE (if applicable).