Filter
Top Products
ATAPI Interface Chapter 5
STT8000A Product Manual Page 57
Rewind command
Bit
Byte
76543210
0 Operation code (01h)
1 Reserved
2 Reserved
3 Reserved
4 Reserved
5 Reserved
The Rewind command first ensures that all buffered write data has been transferred
to the medium, then causes the device to position to BOP of the current partition.
The DSC bit is reset (0) after this command is accepted and is set (1) when the
drive is ready to write at BOP0 (or encountered a hardware error). REQUEST
SENSE can then be used to verify successful command completion.