Filter
Top Products
17
LF/FF: Decrease the top of form by 1/60 inch. You can decrease the margin to a
maximum of -10 (-10/60 inch) from the default setting.
Press the ONLINE key to exit and save your new setting. The POWER LED and ONLINE LED
blink simultaneously 3 times with a beep, and then the POWER LED will be on.
Tear-off Adjustment Mode
There is a tear-off bar at the edge of the window cover. When you have finished printing, you
can advance the tractor paper on the tracker to the tear-off bar by the tear-off function to easily
tear off the perforated sheets. The tear-off setting determines the distance between the
perforation of tractor paper and the tear-off bar. If the default distance is not suitable for you, you
can adjust it by the printer’s tear-off adjustment feature.
With the printer online, press both the PARK/LOAD and LF/FF keys for about 3 seconds to get the
printer to enter the tear-off adjustment mode. When the printer enters this mode, the ONLINE
LED and the POWER LED blink alternately.
Use the PARK/LOAD and LF/FF keys to alter the tear-off setting:
PARK/LOAD: Press the PARK/LOAD key to adjust the distance in 1/60 inch increments. You
can maximum increase to +15/60 inch
LF/FF: Press the LF/FF key to adjust the distance in 1/60 inch decrements. You can
maximum decrease to -15/60 inch
To exit and save your new setting, press ONLINE key. The POWER LED and the ONLINE LED
blink simultaneously for 3 times, then the POWER LED turns on. Your new tear-off setting value is
saved.
Using the Setup Menu System
The factory settings of this printer are selected to meet the requirements of the majority of users.
However, you may want to use a different character set for a different language or you may prefer
printing in different font or style. To achieve this, you can use the Setup Menu System to create
your own printer settings by modifying or changing the factory defaults.
The Setup Menu System is divided into several groups, and each group contains a number of
NOTE
To exit without saving, just turn off the printer.
NOTE
To exit without saving, just turn the printer OFF.