Filter
Top Products
Configuring the conference system
14 | ADN CU1
“Audio” menu
“XLR Out” Calls up the “XLR Out” submenu –
“XLR In” Calls up the “XLR In” submenu –
“Floor/
Loudspeakers”
Calls up the “Floor/Loudspeakers” submenu –
“Audio Gain
Reduction”
The sum signal of all active conference units is output via the floor
channel (“Floor/Loudspeakers”). The “Audio Gain Reduction” menu
item allows you to adjust how the volume levels of the signals of the
individual conference units are processed.
“0.0 dB per Mic” ...
“−3.0 dB per Mic”,
“Linear Division”
“XLR Mix Minus” Activates the filtering of the IN audio input from the OUT audio output
in order to avoid, for example, echoes during videoconferencing or
teleconferencing
“On“/“Off”
“Mic Loudspeaker
Mute”
Deactivates the conference units’ built-in loudspeakers for contributions
coming from the conference units’ microphones
“On“/“Off”
“XLR Out” menu
“XLR Out Status“ Activates/deactivates the OUT audio output “On“/“Off”
“XLR Out Volume“ Adjusts the volume of the XLR output
“01” ... “32”
“XLR Out Equalizer“ Adjusts the tone color of the XLR output
“−12 dB” ... “+12 dB”
“XLR In” menu
“XLR In Status” Activates/deactivates the IN audio input “On“/“Off”
“XLR In Sensitivity” Adjusts the sensitivity of the XLR input
“−18.0 dBu” ...
“+18.0 dBu”
“XLR In Equalizer” Adjusts the tone color of the XLR input
“−12 dB” ... “+12 dB”
Display Function of the menu item Option/display
+02 dB
–03 dB
+05 dB
+02 dB
–03 dB
+05 dB
KA_ADN-CU1_535358_0211_SP13.book Seite 14 Dienstag, 1. Februar 2011 12:43 12