Filter
Top Products
ADN CU1 | 15
Configuring the conference system
ENFRESRUNL ITJPDK ZHFINO SE DE
“Floor/Loudspeakers” menu
“Floor/Loudspeakers
Volume”
Adjusts the floor channel volume (“Floor/Loudspeakers”)
“00” ... “32”
“Floor/Loudspeakers
Equalizer”
Adjusts the tone color of the floor channel
“−12 dB” ... “+12 dB”
“System” menu
“Ports” Displays the type and number of the conference units connected to
Port I and Port II
“Diagnostics” Calls up the “Diagnostics” submenu –
“Versions” Calls up the “Versions” submenu –
“Diagnostics” menu
“System Load” Provides information on the current and voltage supply
“Temperature” Provides information on the temperature status
“Bus Statistics” Provides information on the status of data transmission/errors
“Start Self-Test” Performs a self-test on the conference system “On“/“Off”
“Reset Break
Indication”
Resets the error counter (“Break Count”) in the “Bus Statistic”
menu item
“Yes“/“No”
“Reset Error
Indication”
Resets the display for data bus errors (“Error Indication”) in the
“Bus Statistic” menu item
“Yes“/“No”
“Versions” menu
“Hardware
Version Info”
Displays the hardware version
“Software
Version Info”
Displays the software version
“Settings” menu
“Network” Calls up the “Network” submenu –
“Contrast” Adjusts the contrast of the display panel “1” ... “15”
“Lock” Activates/deactivates the lock mode “On“/“Off”
“Restore Factory
Defaults”
Restores the factory default settings “Yes“/“No”
“Network” menu
“IP Address Mode” Sets the IP address allocation mode “Static IP“/“Dynamic IP”
“IP Address” Sets the IP address of the central unit “xxx . xxx . xxx . xxx”
“Subnet Mask” Sets the subnet mask of the central unit “xxx . xxx . xxx . xxx”
Display Function of the menu item Option/display
+02 dB
–03 dB
+05 dB
Deleg Chair.
Port1: xx xx Units
Port2: xx xx Units
Error Indication :
Break Count : 1
DU/PU: 1
CU SB: 1
DU/PU: 0.1.1.5
CU SB: 1.0.0.0
CU Main: 1.0.0.1
KA_ADN-CU1_535358_0211_SP13.book Seite 15 Dienstag, 1. Februar 2011 12:43 12