Filter
Top Products
Configuring the conference system
16 | ADN CU1
Working with the operating menu
By way of example of the “Microphone Limit“ menu item, this section describes
how to use the operating menu.
Changing from the standard display to the operating menu
̈ Press the jog dial.
The standard display is replaced by the main menu. The last selected menu
item is highlighted.
Calling up a menu item
̈ Press the jog dial to call up the “Conference” menu item.
The “Conference” submenu appears.
̈ Turn the jog dial to select the “Microphone Limit” menu item.
̈ Press the jog dial to call up the “Microphone Limit” menu item.
Changing and storing settings
̈ Turn the jog dial to adjust settings in the “Microphone Limit” menu item.
̈ Press the jog dial.
Your setting is stored. You are back to the operating menu.
Canceling an entry
Or:
To subsequently directly return to the last edited menu item:
Exiting the operating menu
Or:
“Main Menu”Standard display
Direct Access
30 Units
20
Main Menu
Conference
Audio
System
Select and call up the
“Conference” submenu
Select and call up the
“Microphone Limit”
menu item
The “Microphone Limit”
menu item appears
Main Menu
Conference
Audio
System
Conference
Conference Mode
Microphone Limit
Request Limit
Microphone Limit
Conf. Mode
Microphones 05
No. Request
05 05
Select the desired
setting
Store the setting
Microphone Limit
Conf. Mode
Microphones 05
No. Request
Microphone Limit
Conf. Mode
Microphones 07
No. Request
05 07
Select and call up the
“Microphone Limit”
menu item
Conference
Conference Mode
Microphone Limit
Request Limit
5
̈ Press the ESC key.
The operating menu or the next higher menu level appears.
̈ Press the standard display key.
The standard display appears.
̈ Press the jog dial repeatedly until the last edited menu item appears.
̈ Press the standard display key.
The standard display appears.
̈ Press the ESC key repeatedly until the standard display appears.
KA_ADN-CU1_535358_0211_SP13.book Seite 16 Dienstag, 1. Februar 2011 12:43 12