Filter
Top Products
SharkRack Enclosure Installation Guide
ID-00210-000 REV D, ECO2773 Page 25 of 46
How to Remove or Install a Top Panel
Step Detail
The Top Panel can be removed.
To remove a Top Panel:
1. Unlock the Top Panel using the key.
2. With the key turned in the unlocked position, lift up until
you can grab the top panel with your free hand.
Note: If using a grounding kit, remove the cable prior to
lifting the panel from the Cabinet Frame. See “Installing
a Grounding Kit” for details.
3. Remove the Top Panel and set aside.
To install a Top Panel:
1. Set the Top Panel on the top of the Cabinet Frame. When
installed properly it should sit flush with the rest of the
cabinet
2. Lock the Top Panel using the key, if preferred.
Figure 25
42U X 37DP Cabinet Shown