Filter
Top Products
SharkRack Enclosure Installation Guide
ID-00210-000 REV D, ECO2773 Page 36 of 46
Chapter 5 Final Assembly
Check for Functionality
• Have a qualified electrician verify the power sources for your specified power
requirements.
• Check that there is no obstruction to any device that needs to be accessed for
maintenance.
• Check that there is easy access to the power strips
• Check that all fasteners are tight. Typical torque values are:
o 10-32 30 inch-lbs.
o M5 24 inch-lbs.
o M6 40 inch-lbs.
• Re-install the doors (See “Installing and Removing Doors” for details).
• Power up devices.