Filter
Top Products
Setup
16
Connecting the power cord
Plug the power cord into a 120 V, 60 Hz, grounded AC (3-prong)
outlet.
Caution!
♦
Do not plug the power cord into any other kind of outlet. This will
damage the machine and is not covered under the warranty.
♦
Make sure you have removed the packing tape and stoppper and
released the scanner before plugging in the power cord. Plugging in
the power cord without doing so may damage the machine.
Press the
POWER
switch to turn on the
display.
(The main machine
power is turned on or
off by plugging in or
unplugging the
power cord.)
all.book Page 16 Wednesday, January 31, 2001 4:29 PM