Sharp AL-1255 All in One Printer User Manual


 
38
All About The Windows Event Manager and scanner events in
Windows 98, Windows Me, Windows 2000 and Windows XP.
Windows Platforms provide a mechanism for software to handle external events for
a scanner device like the SHARP AL-xxxx (where xxxx is the model name of your
unit) series products. This mechanism is controlled by the device manager on a
device basis. Applications that can handle events from a scanner/camera device
register with the Windows Event Manager and shown as available in the registered
applications. The path an event takes to get to the user's selected application
depends upon the event settings for the device.
Using the SCANNER key to begin scanning
1
Press the SCANNER ( ) key.
The unit enters scan mode.
Scanning is not possible during a copy job.
If the unit is used to begin a scan job during a print job using the parallel
interface connection or the USB interface connection, the scan job will be
stored and scanning will begin when the print job is completed.
When scanning an original that has been placed in the SPF/RSPF, only
one original can be placed unless you are using Sharpdesk.
Scanner AL-
xxxx (where
xxxx is the
model name of
your unit)
SCANNER key
pressed.
Event Manager
Windows OS
Event Manager
selection dialog
Displayed on
screen
User selects an
application.
The user
application
opens.
This is the Windows Event Manager
Selection Dialog.
Shown are 2 applications registered
to handle the scanner event from the
AL-xxxx (where xxxx is the model name
of your unit) device.
Event on device: SHARP AL-1555