Filter
Top Products
16
2
Installation
POWER ON
Turn the power switch on the left side of the copier to the “ON” position. The ready ( ) indicator
will light up and other indicators which show the initial settings of the operation panel will also
light up to indicate the ready condition. For the initial settings, see the “Initial settings of operation
panel” described below.
●
The copier will enter a power save mode once the set time has elapsed without
any copier operation after the last copy of a run is made or power is turned on.
The settings of the power save modes can be modified. See page 24, USER
PROGRAMS.
●
The copier will return to the initial settings a preset amount of time after the
last copy is made. The preset amount of time (auto clear time) can be changed.
See page 24, USER PROGRAMS.
Initial settings of operation panel
The copier assumes the initial settings when the copier is turned on or a preset time (auto clear
time) elapses after the last copy is made. The initial settings of the operation panel are shown
below.
“0” is displayed in the
display.
ZOOM
100%
5
1
/
2
8
1
/
2
x
5
1
/
2
8
1
/
2
x
8
1
/
2
11
x
8
1
/
2
11
x
8
1
/
2
14
x
8
1
/
2
11
x
50%
64%
78%
100%
129%
200%
MAX.
MIN.