Sharp AL-1340 All in One Printer User Manual


 
29
5
Supplies and user maintenance
Original table and original cover
Stains on the glass or cover will also be copied. Wipe the glass and the cover with a soft, clean
cloth. If necessary, dampen the cloth with water or a glass cleaner.
Original table Original cover
Transfer charger
If copies start becoming streaky or blotchy, the transfer charger may be dirty. Clean the charger
using the following procedure.
1
Turn the power switch off.
2
Open the side cover while pressing the side cover open button.
3
Take the charger cleaner out by holding the tab.
Set the charger cleaner onto the right end of transfer charger, gently slide the cleaner
to the left end, and then remove it. Repeat this operation two or three times.
Slide the charger cleaner from the right end to the left end along the groove of
the transfer charger. If the cleaner is stopped on the way, smudges on copies
may occur.
USER MAINTENANCE