Filter
Top Products
11
GETTING STARTED
SET-UP
1
Remove all pieces of tape. Then open the platen
cover and remove the protective material.
2
Use a coin (or suitable object) to remove the screw.
Store the screw in the paper tray as described in
step 6 because it will be used if the copier has to
be moved. (p. 42)
3
Install the TD cartridge.
●
For installation of the TD cartridge, see steps 1 to 2 and steps 4 to
7 of TD CARTRIDGE REPLACEMENT on pages 24 and 25.
4
Gently lift and pull out the paper tray until it stops.
5
Remove the pressure plate lock. Rotate the
pressure plate lock in the direction of the arrow to
remove it while pressing down the pressure plate of
the paper tray.
Set-up