Filter
Top Products
6
GETTING STARTED
Operation
panel
PART NAMES AND FUNCTIONS
Part names and functions
q AUTO/MANUAL/PHOTO ( / / ) key
and indicators (p. 15)
Use to sequentially select the exposure modes: AUTO,
MANUAL ( ), or PHOTO ( ).
w Alarm indicators
: Paper required indicator (p.13)
: Misfeed indicator (p.28)
: TD cartridge replacement required indicator
(p.24)
: Drum replacement required indicator (p.26)
e Paper feed location/misfeed location indica-
tors (p. 28)
The selected paper feed location is shown by a lit
indicator ( ).
The misfeed location indicator ( ) blinks when a
misfeed has occurred.
r INTERRUPT key and indicator (p. 21)
Interrupts a copy run.
t Copy quantity display
Displays the specified copy quantity during the ready
condition and displays the copy countdown as copies
are made. Also see items !3 and !5.
y CLEAR ALL ( ) key
Clears all selected settings and returns the copier to the
initial settings.
u POWER SAVE ( ) indicator (p. 34)
Lights up when the copier is in the preheat mode.
i Light ( ) and dark ( ) keys and indicators
(p. 15)
Use to adjust the MANUAL ( ) or PHOTO ( )
exposure level.
o TRAY SELECT ( ) key (p. 15)
Use to manually select a paper tray.
!0 PRESET RATIO selector keys and indicators
(p. 17)
Use to sequentially select preset reduction/enlargement
copy ratios: 50%, 64%, 77%, 95%, 100%, 121%, 129%,
141%, 200%.
!1 ZOOM indicator (p.17)
Lights up when a zoom ratio is set.
GETTING STARTED