Filter
Top Products
12
GETTING STARTED
Set-up
SET-UP
Pressure
plate lock
Screw
6
Store the pressure plate lock which has been
removed in step 5 and the screw which has been
removed in step 2 in the front of the paper tray.
●
To store the pressure plate lock, rotate the lock to fix it on the
relevant location.
7
Ensure that the power switch of the copier is in the
OFF position. Plug the power cord into the nearest
outlet.
If you use the copier in a country other than the
country where the copier was purchased, you will
need to make sure that your local power supply is
compatible with your model. If you plug the copier
into an incompatible power supply, irreparable
damage to the copier will result.
Only insert the power cord into a properly
grounded wall socket.
Do not use extension cords or power strips.
Connect the copier to a power outlet which is not
used for other electric appliances. If a lighting
fixture is connected to the same outlet, the light
may flicker.
8
Turn the power switch on.
9
Load copy paper.
●
When loading copy paper for the first time, be sure to turn the
power switch on in advance.
If you use copy paper other than 8-1/2" x 11" (default size), use
user program No. 21 to set the paper size. See page 32.
●
For loading copy paper, see steps 2 to 4 of LOADING COPY
PAPER on page 13.
Power on