Sharp AR-201 All in One Printer User Manual


 
12
GETTING STARTED
Loading copy paper
LOADING COPY PAPER
8
To set the selected paper size, press the PAPER SIZE
ENTER ( ) key.
The selected paper feed location indicator will blink and the
corresponding paper size (which is currently set) indicator will light
up steadily. All other indicators will go out.
For paper size setting, ensure that the COPY mode
has been selected. However, if copying, printing or
facsimile printing is being performed, paper size setting
cannot be made even in the COPY mode. See Note
on page 48.
9
Use the TRAY SELECT ( ) key to select the paper tray
of which the paper size has been changed.
Each time the TRAY SELECT ( ) key is pressed, a paper tray will
be indicated with a blinking paper feed location indicator.
10
Use the ORIGINAL SIZE ENTER ( ) key to select
the paper size which is set.
Each time the ORIGINAL SIZE ENTER ( ) key is pressed,
a paper size will be indicated with a paper size indicator.
11
Press the START ( ) key and then the PAPER SIZE
ENTER ( ) key.
To change the paper size setting of another tray, repeat steps 9 to 10
after pressing the START ( ) key.