Filter
Top Products
42
GENERAL INFORMATION
USER PROGRAMS
User programs
Program No. 15: Resetting account
Program No. 15 is used to reset all accounts or to reset any desired individual
account. When program No. 15 is entered, “0” will blink on the right side of
the copy quantity display.
●
If no account number has been registered, “15E” will appear in the copy
quantity display. Press the key. The copier will return to step 2 on page
37.
1. To reset an individual account, press the 0 key.
To reset all accounts, press key 1.
2. Press the START ( ) key.
●
If you have pressed the 0 key in step 1, an account number will appear
in the copy quantity display. Proceed to step 3.
●
If you have pressed key 1, the number of copies against all account
numbers will be reset. Proceed to step 5.
3. Use the copy ratio display ( ) key to select the account
number to be reset.
●
Use the key to advance through the account numbers.
4. Press the START ( ) key.
●
The number of copies against the specified account number will be
reset.
5. To continue with other user programs, enter another
program number. To exit the user program mode, press
the light ( ) key.