Filter
Top Products
44
* Factory default settings are indicated with an asterisk (*).
5
Press the start ( ) key. The right-hand number in the display
will be steadily lit and the entered value will be stored.
6
Press the light ( ) key to return to the normal copy mode.
DISPLAYING TOTAL NUMBER OF COPIES
Use the following procedure to display the total number of copies.
1
Press and hold down the clear ( ) key for approximately 5 seconds.
The total number of copies will appear in two steps, each with three
digits.
Example: Total number of copies is 1,234.
6
SPF automatic
original discharge
time (if installed)
1 5 min., *2 30 min.,
3 60 min., 4 120 min.,
5 240 min., 6 OFF
10
Resolution of AUTO
& MANUAL mode
*1 300dpi, 2 600dpi
21 Reset factory 1 YES, *2 NO
24
Prevention of OC
copies when the
SPF is up function
*1 ON, 2 OFF
25
Copy effective paper
width setting function
(Bypass tray)
*1 Large (A4 width),
2 Small (B5R width)
26
Copy effective paper
width setting function
(Tray 1)
*1 Large (A4 width),
2 Small (B5R width)
27
Copy effective paper
width setting function
(Tray 2 if installed)
*1 Large (A4 width),
2 Small (B5R width)
28
Selection of copy
start state (Polygon
rotation on/off)
*1 ON, 2 OFF
29
Fusing temperature
setting when the
bypass tray is used
1 Low, *2 High
To change the setting or to set another mode, press the clear
( ) key. The unit will return to step 2.
Program
No.
Mode Parameters