Filter
Top Products
60
250-SHEET PAPER FEED UNIT (AR-D33)
The paper feed unit provide the convenience of increased paper capacity for the unit
and a greater choice of paper size readily available for copying.
The procedures for loading paper in the
paper tray of paper feed unit, changing
the paper size, and selecting the paper
tray are same as for the paper tray in the
unit. See "LOADING THE PAPER TRAY"
(p.8) and "Selecting the tray" (p.19).
Using the paper feed unit
with the printer function
The AR-D33 can also be used with the printer function. To use the AR-D33 with the
printer function, follow these steps to adjust the settings in the printer driver.
1
Click the "start" button.
2
Click "Control Panel", select "Printer and Other Hardware", and
then click "Printer and Faxes".
• On Windows Vista, select "Settings" and click "Printers".
• On Windows 98/Me/2000, select "Setting" and click "Printers".
3
Click the "SHARP AR-xxxx" printer driver icon and from the
"File" menu select "Properties".
• On Windows Vista, click the "SHARP AR-xxxx" printer driver icon and
select "Properties" from the "Organize" menu.
• On Windows 98/Me, click the "SHARP AR-xxxx" printer driver icon, select
"Properties" from the "File" menu, and then click the "Setup" tab.
4
Click the "Utility" tab.
5
Select "Two trays" for "Input tray
option", and click "OK".
The printer driver closes. This completes the
settings needed to use the AR-D33.
The printer driver cannot be set for use with the AR-D33 when opened
from the application.
Lower side cover
Tray