Filter
Top Products
33
INITIAL SETTINGS
2
SETTING THE RECALL INTERVAL
The machine will automatically reattempt transmission when a transmission is not successful because the line is
busy or a communication error occurs. This setting is used to select the interval between recall attempts.
When the line is busy
You can select the interval between recall attempts when the line is busy. An interval from 1 to 15 minutes can be
selected.
1
Press the [MENU] key.
2
Press the [ ] key ( ) or [ ] key ( )
until "4:USER PROGRAM" appears,
and then press the [OK] key.
3
Press the [ ] key ( ) or [ ] key ( )
until "10:RECALL INT. BUSY"
appears, and then press the [OK] key.
4
Press the numeric keys to select the
recall interval.
Enter the recall interval
("01" to "15").
5
Press the [OK] key.
6
Press the [MENU] key.
Press the [MENU] key to
exit.
•If a transmission is still not successful after the set number of recall attempts is made, a report will
print and the document will be cleared from memory.
•If a communication error occurs because the memory becomes full during transmission, no recall
attempts will be made.
•Recall attempts for a direct transmission will only be made when the SPF/RSPF is used. Recall
attempts will not be made when the document glass is used.
•When the machine is waiting to make a recall attempt for a direct transmission, other operations
such as storing a transmission or selecting a function cannot be performed.
Note
1,2,3,
1,2,3,
SP. FUNC
"4:USER PROGRAM"
Selection
"10:RECALL INT. BUSY"
Selection
1,2,3,
1,2,3,
SP. FUNC
1,2,3,
1,2,3,
SP. FUNC