Filter
Top Products
79
SPECIAL FUNCTIONS
5
6
Press the [ ] key ( ) or [ ] key ( )
to select the day of the week and
press the [OK] key.
7
Press the [OK] key.
8
Press the [ ] key ( ) or [ ] key ( )
to select the transmission mode and
press the [OK] key.
The selections are as
follows:
1:SEND MODE
2:BROADCAST MODE
3:POLLING MODE
4:SERIAL POLL MODE
9
Enter the fax number of the other
machine using one of the following
methods:
•Press a Rapid key.
•Enter a Speed Dial number with the numeric
keys.
•Enter the fax number with the numeric keys.
10
Press the [START] key ( ).
CANCELING A TIMER TRANSMISSION JOB
After a timer transmission job is set up, the job goes on standby until the specified time of transmission. If necessary,
the MEMORY STATUS function can be used to cancel a timer transmission job that is on standby ("CANCELING
(DELETING) A STORED FAX JOB" on page 61).
1,2,3,
1,2,3,
SP. FUNC
1,2,3,
1,2,3,
SP. FUNC