50
CHOOSING SUITABLE MEDIA
UNSUITABLE ORIGINALS
General guidelines:
●All clips, staples, and pins should be removed from originals before they are used. If these are not removed, they
may damage the machine.
●Ink, glue, and correction fluid on originals must be completely dry before using the originals with the machine.
●Originals that are in some way dangerous to the internal mechanisms of the machine should not be used.
●When faxing, any writing on the originals that is yellow, yellowish-green, or light blue cannot be transmitted.
The following kinds of originals should not be used:
●Originals with a glossy coating
●Originals with static electricity
●Originals with tears, folds, or curls
●Originals that have become stuck together and cannot be easily separated
●Originals with holes, windows, or perforations
●Transparency films, tracing paper, or other transparencies
●Originals with plastic or metallic coatings
• SHARP does not accept any responsibility for the loss or damage of originals.
• It is a good idea to copy valuable originals on a flat-bed copier before using them with the machine.
• Scanning an original that is longer than 500 mm will result in a misfeed.
Note