Filter
Top Products
Sending a Fax by Automatic Dialling
43
2. Sending
Faxes
Searching for an auto-dial number
If you don’t remember the Rapid Key or Speed Dial number in which you have
stored a full fax or phone number, follow these steps to search for the number.
1 If you are sending a fax, load the
document(s).
• If desired, press to set the
resolution and/or contrast.
2 Press (or ) until the name of the other party appears in
the display (if no name was stored, the number will appear).
3 If you are sending a fax, press . Dialling and transmission begins.
• If the transmission is completed successfully, the machine will beep once.
• If an error occurs, the machine will beep three times and print a Transaction
Report to inform you of the problem (see page 86).
If you are making a phone call, lift the handset. Dialling begins. (If you
lifted the handset before searching for the number, press to
begin dialling.)
RESOLUTION/
RECEPTION MOD
E
A
R
EDIAL
Z
START
START
READY TO SEND
all.book Page 43 Friday, October 31, 2003 4:10 PM