Filter
Top Products
Sending a Fax by Automatic Dialling
45
2. Sending
Faxes
1 If you are sending a fax, load the
document(s).
• If desired, press to set the
resolution and/or contrast.
2 Press once. <REDIAL> appears in the display, followed by
the last number dialled. Make sure the number that appears is the
number you wish to dial.
3 If you are sending a fax, press . Dialling begins.
If you are making a phone call, lift the handset. Dialling begins.
RESOLUTION/
RECEPTION MOD
E
R
EDIAL
Z
START
Redial
You can automatically redial the last number dialled on the fax machine. This
procedure can be used to send a fax or make a phone call.
Automatic redialling
If you use automatic dialling (including Direct Keypad Dialling) to send a fax
and the line is busy, the fax machine will automatically redial the number. The
fax machine will make two redial attempts at intervals of five minutes. During
this time, RECALLING will appear in the display, followed by a two-digit
number assigned to the fax job. You will not be able to dial any other locations
while the message appears.
♦ You can press to clear the message and stop automatic redialling.
♦ Under certain conditions (for example if a person answers the call on a
telephone), automatic redialling may stop before the set number of redial
attempts are made.
STOP
READY TO SEND
all.book Page 45 Friday, October 31, 2003 4:10 PM