Filter
Top Products
Maintenance
95
8. Maintenance
4 Take a sheet of clean paper and roll it into a tube. Roll it tightly so that
the diameter of the holes at each end is less than the thickness of your
little finger.
5 Gently wipe the surface of the drum
with the rolled-up paper to remove any
particles of toner caked on the drum.
• Do not let the drum surface come into
contact with anything other than the
rolled-up paper. Fingerprints, water,
alcohol, and other solvents will damage
the drum surface.
• Do not touch the drum surface with the
edges of the rolled-up paper.
6 Replace the drum cartridge, holding
the tabs on the drum cartridge handle
with both hands.
• To insert the cartridge, align the guides
on the cartridge with the runners on the
sides of the compartment.
7 Replace the toner cartridge and close the print compartment cover (see
page 15).
all.book Page 95 Friday, October 31, 2003 4:10 PM