Filter
Top Products
Optional Settings
111
6. Optional
Settings
Setting 18: RETRANSMISSION INTERVAL
You can select the number of minutes the fax waits between each memory
retransmission attempt. Enter for 1 minute, for 2 minutes,
etc., up to a maximum of 15 minutes. If you do not want the fax to wait
between attempts, enter .
♦ Initial setting: 02
Setting 19: POWER SAVE MODE
To conserve power, you can have the laser printer heater in your fax machine
turn off when not in use. When this is done, the heater will turn on
automatically when you receive a document (there will be a slight delay before
printing while the heater warms up) and turn off when printing is completed.
Press to turn on Power Save mode, or to turn it off.
♦ Initial setting: 1
Setting 20: ANTI-JUNK FAX
Press to block reception from fax numbers entered in the Anti Junk Fax
List. Press to allow reception from all numbers.
♦ Initial setting: 2
Setting 21: ALARM VOLUME
This sets the volume of the beep sound that alerts you to error conditions and
informs you that operations have been completed. Press for HIGH,
for LOW, or for OFF.
♦ Initial setting: 2
Setting 22: DIAL MODE
This sets the dial mode. Press if you are on a touch-tone line, or if
you are on a pulse dial (rotary) line.
♦ Initial setting: 1
0
1
0
2
0 0
1 2
1
2
1 2
3
1 2