Sharp FO-5550 Fax Machine User Manual


 
Sending a Fax by Automatic Dialing
54
5
Press the
START
key. The document
will be automatically transmitted
once the connection is established.
Chain Dialing
An auto-dial number set for Chain Dialing can be combined with
another auto-dial number or digits entered manually with the numeric
keys to dial one phone number up to 50 digits long. The following are
some examples of how this can be done:
Press appropriate Rapid Keys in the proper order. For example,
press Rapid Key 01 (set for Chain Dialing), then Rapid Key 02 (not
set for Chain Dialing).
Press a Rapid Key (set for Chain Dialing) and then manually enter a
number by pressing appropriate numeric keys. Press the
START
key after the final numeric key to begin transmission.
Checking the telephone line status
The display normally shows the date and time and prompts related to
operations you are performing. To check and see what number the fax
machine is currently calling or transmitting to, or what number the fax
machine is currently receiving a document from (if this information is
available), press the
CHANGEOVER
key. Information on the
current call will appear in the display. To switch back to the date and
time display, press the
CHANGEOVER
key again.
To cancel a fax transmission or reception
To cancel a fax transmission or reception which is currently in
progress, press the
CHANGEOVER
key so that the status of the
transmission or reception appears in the display, and then press the
STOP
key.
START
all-FO4700.book Page 54 Friday, June 11, 1999 1:57 PM