Filter
Top Products
2.3 <
System setup>
2. Layout menu
Use the 2. Layout menu to define all settings relating to output.
Item Explanation
Orientation
Choose the default orientation of the print image
on the page.
Simplex
Margin
Set the margin of print meterials for one-sided
printing. You can increase or decrease the value in
0.1 mm increments.
• Top Margin: Set the top margin, from 0 to 250
mm.
• Left Margin: Set the left margin, from 0 to 164
mm.
Values: Portrait, Landscape
Portrait
Landscape
Values: Top Margin: 0, Left Margin: 0
Duplex
To print on both sides of paper, choose the binding
edge as follows.
•
Long Edge
: Flip on the long edge.
•
Short Edge
: Flip on the short edge.
Select Off to print on one side of the paper.
Duplex
Margin
In this menu, you can set the margins for double-
sided printing. You can increase or decrease the
value in 0.1 mm increments.
• Top Margin: Set the top margin, from 0.0 to 9.9
mm.
• Left Margin: Set the left margin, from 0.0 to 9.9
mm.
• Short Binding: Set the bottom margin of the
back of the page for short binding, from 0 to 22
mm.
• Long Binding: Set the right margin of the back
of the page for long binding, from 0 to 22 mm.
Item Explanation
Values: Off, Long Edge, Short Edge
Long Edge in the
Portrait orientation
Long Edge in the
Landscape orientation
25
3
2
5
3
2
5
3
2
5
3
Short Edge in the
Landscape orientation
Short Edge in the
Portrait orientation
Note
• In the ML-4550 and ML-4551N, this menu
item is available when the optional duplex
unit is installed.
Values: Top Margin/ Left Margin: 5.0,
Short Binding/ Long Binding: 0
Note
• In the ML-4550 and ML-4551N, this menu
item is available when the optional duplex
unit is installed.