Filter
Top Products
34
MAC OS X
X Printing using the IPP function
The machine can print using the IPP function. When the machine is in a remote location, this function can
be used in place of the fax function to print a higher quality image than a fax. If you wish to use the IPP
function, follow these steps to select the PPD file when configuring the printer driver (step 14 on page 32).
(1) Click the [IP Printer] icon.
If you are using Mac OS X v10.5 to
10.5.6, click the [IP] icon.
(2) Select [Internet Printing
Protocol] in "Protocol". Enter
the address of the machine (IP
address or domain name) and
the queue name.
Enter "ipp" in "Queue".
(3)
Select [Sharp] in "Print Using" and
click the PPD file of your model.
If you are using Mac OS X v 10.5 to 10.5.6,
select [Select a driver to use] from "Print
Using" and click the PPD file for your model.
(4) Click the [Add] button.
If you are using Mac OS X v 10.5 to
10.5.6, the "Installable Options" screen
will appear. Make sure that the settings
are correct and click the [Continue] button.
☞ Checking the IP address of the
machine (page 6)
(1) Select [IP Printing].
(2) Select [Internet Printing
Protocol] in "Printer Type".
Enter the address of the
machine (IP address or domain
name) and the "Queue Name".
• If you are using Mac OS X v10.2.8,
enter the address of the machine (IP
address or domain name) in "Printer's
Address".
• Enter "ipp" in "Queue Name".
(3) Select [Sharp] in "Printer
Model" and click the PPD file of
your model.
(4) Click the [Add] button.
☞ Checking the IP address of the
machine (page 6)
v10.4.11, v10.5 - 10.5.6
(1)
(2)
(4)
(3)
v10.2.8, v10.3.9
(1)
(2)
(4)
(3)
Setup_multi.book 34 ページ ２００９年７月７日 火曜日 午後２時８分