Filter
Top Products
Improving Print Quality
110
Wiping the print nozzles and contacts
If you have cleaned the print nozzles as explained in the previous
section at least three times and print quality is still not satisfactory, try
wiping the print nozzles and contacts.
1
Open the print compartment cover and remove the cartridges from the
Color Inkjet.
5
Open the print compartment cover of the Color Inkjet, and remove
and reinstall the print cartridge.
6
Repeat the nozzle test. If the lines are still broken, wipe the nozzles as
explained in the following section.
2
Dampen a clean cloth with water, and
gently wipe the nozzles and the gold-
colored area around the nozzles.
• To dissolve dried ink, hold the
damp cloth against the nozzles for
about three seconds. Gently blot
and wipe dry.
• When finished, allow the gold-
colored area to dry.
all.book Page 110 Wednesday, January 31, 2001 4:29 PM