Filter
Top Products
Setup
17
1. Installation
Connecting the telephone line cord
Insert one end of the line cord into the jack on the back of the machine
marked TEL. LINE. Insert the other end into a standard (RJ11C)
single-line wall telephone jack.
Dial mode: The fax machine is set for tone dialing. If you are on a
pulse dial line, you must set the fax machine for pulse dialing. Press
the keys on the operation panel as follows:
1
Press these keys:
The display will show:
2
Press 1 to select tone dialing, or 2 to
select pulse dialing.
3
Press the STOP key to return to the
date and time display.
1
2
or
TONE PULSE
DIAL MODE
1=TONE, 2=PULSE
STOP
FUNCTION
4
Be sure to insert
the line into the
TEL. LINE
jack.
Do not
insert it into
the
TEL. SET
jack.
1
TEL.
LINE
3
all.book Page 17 Wednesday, January 31, 2001 4:29 PM