Filter
Top Products
Sharp AR-C200P: Troubleshooting • 147
Printer takes a long time to start printing.
Toner rubs off when you rub the printed surface.
Possible Cause Remedy
The printer has to warm up
returning from power save
mode.
In the printer menu settings, set power save to a
higher value to increase the length of time before
entering power save mode.
The image drum carries out
a cleaning process to
ensure print quality, which
takes time.
Wait until this process has been completed.
The fuser unit adjusts
temperature, which takes
time.
Wait until this process has been completed.
The printer is processing
data from another
interface.
Wait until this data is processed.
Possible Cause Remedy
Media Weight and Media
Type settings may not be
appropriate.
Set the value of media weight to the next heaviest
one.
Packing materials were left
on the fuser when it was
installed.
Careful! Fuser my be HOT!
Open the top cover and check to be sure that all the
packing materials were removed from the fuser. To
remove the fuser see “Changing the Fuser Unit” on
page 164.