Sharp PG-A10X Projector User Manual


 
Easy to Use Functions
-45
Video System (Setting the
Video System)
The video input system mode is preset to Auto;
however, a clear picture from the connected audio-
visual equipment may not be received, depending
on the video signal difference. In that case, switch
the video signal.
Select Video System on the Options menu
and the appropriate video system.
Description of Video Systems
Note
The video signal can only be set in INPUT 2 or
INPUT 3 mode.
In Auto, images are displayed in PAL even if
PAL-N or PAL-M input signals are received.
Background (Selecting a
Startup and Background Image)
Select Background on the Options menu
and the image displayed upon the projectors
startup and when no signal is being sent to
the projector.
Description of Background Images
Note
If the input signal has interference, the screen
will be displayed during interference.
Eco Mode (Setting the Eco
Mode)
Select (Eco Mode) or (Standard
Mode) in Eco Mode on the Options
menu.
Description of Eco Mode
Note
Although lamp life and noise are improved when
Eco Mode is set to (Eco mode), bright-
ness decreases by 20%.
Eco Mode mode is factory preset to
(Stan-
dard mode).
Sharp
Blue
None
Selectable settings
PAL
SECAM
NTSC4.43
NTSC3.58
Description
When connected to PAL video
equipment.
When connected to SECAM video
equipment.
When reproducing NTSC signals in
PAL video equipment.
When connected to NTSC video
equipment.
Selectable settings
Sharp
Blue
None
Description
SHARP default image
Blue screen
Black screen
Brightness
80%
100%
Selectable settings
(Eco mode)
(Standard mode)
Power consumption
(When using AC 100V)
190 W
240 W
Lamp
life
4,500 hours
3,000 hours