Filter
Top Products
Easy to Use Functions
-49
If you want to change the keycode, follow
the procedure below.
Note
• When “Anti-Theft” is selected, the password in-
put box will appear. After the password has been
entered, you can change the keycode.
1 Press the buttons on the remote
control or the projector to enter the
preset 4-digit keycode in “Old
Code”.
2
Press any button you like on the re-
mote control or the projector to en-
ter the new keycode.
3 Enter the same 4-digit keycode in
“Reconfirm”.
Note
• If you do not want to set a keycode, leave the
keycode field blank in steps 2 and 3 and press
.