Filter
Top Products
-28
Image Projection
Selecting the On-screen
Display Language
The on-screen display language of the projector can be
set to English, German, Spanish, Dutch, French, Ital-
ian, Swedish, Portuguese, Chinese, Korean or Japanese.
1
Press on the remote control.
•The “Picture” menu will be displayed.
2 Press \ or | to select the “Lan-
guage” menu icon.
•The “Language” menu will be displayed.
3
Press ' or " to select the desired
language, and then press
.
4 Press .
•The desired language will be set as the
on-screen display.
Turning the Power off
1 Press
STANDBY
on the projector or
STANDBY
on the remote control, then
press that button again while the
confirmation message is dis-
played, to put the projector into
the standby mode.
Note
•
If you accidentally pressed
STANDBY
or
STANDBY
and do not want to put the projector
into the standby mode, wait until the con-
firmation message disappears.
•The projector cannot be operated
while a message “Shutting Down.
Please Wait.” is displayed.
2
Unplug the power cord from the AC
outlet after the cooling fan stops.
Info
•
Do not unplug the power cord during pro-
jection or cooling fan operation. This can
cause damage due to rise in internal tem-
perature, as the cooling fan also stops.
', ", \, |
buttons
ENTER
button
STANDBY
button
MENU button
“Language” menu icon
PG-A20X_E_PDF_P26_31.p65 03.4.23, 9:57 AM28