Filter
Top Products
-54
5 Clean the air filter.
•Clean the dust off the air filter and cover
with a vacuum cleaner extension hose.
6 Replace the air filter.
•Place the air filter underneath the tabs
on the filter/lamp unit cover.
7 Replace the filter/lamp unit
cover.
•Align the tab on the filter/lamp unit cover
(1) and place it while pressing the tab
(2) to close it. Then tighten the user
service screw (3) to secure the filter/
lamp unit cover.
Note
•Be sure the filter/lamp unit cover is
securely installed. The power will not turn
on unless it is correctly installed.
•If dust or dirt has collected inside the rear
and bottom air filters (not removable), clean
the filter with a vacuum cleaner extension
hose.
1
2
3
Replacing the Air Filter
Tab
User service screw
PG-A20X_E_PDF_P51_62.p65 03.4.23, 9:59 AM54