Sharp UX-460 All in One Printer User Manual


 
Important safety information
Do not disassemble this machine or attempt any procedures not described
in this manual. Refer all servicing to qualified service personnel.
This machine must only be connected to a 120 V, 60 Hz, grounded
(3-prong) outlet. Connecting it to any other kind of outlet will damage
the machine and invalidate the warranty.
Do not install or use the machine near water, or when you are wet. Take
care not to spill any liquids on the machine.
Unplug the machine from the power outlet and telephone jack and consult
a qualified service representative if any of the following situations occur:
- Liquid has been spilled into the machine or the machine has been
exposed to rain or water.
- The machine produces odors, smoke, or unusual noises.
- The power cord is frayed or damaged.
- The machine has been dropped or the housing damaged.
Do not allow anything to rest on the power cord, and do not install the
machine where people may walk on the power cord.
Never insert objects of any kind into slots or openings on the machine.
This could create a risk of fire or electric shock. If an object falls into the
machine that you cannot remove, unplug the machine and consult a
qualified service representative.
Do not place this machine on an unstable cart, stand or table. The machine
could be seriously damaged if it falls.
Never install telephone wiring during a lightning storm.
Never install telephone jacks in wet locations unless the jack is specifi-
cally designed for wet locations.
Never touch bare telephone wires or terminals unless the telephone line
has been disconnected at the network interface.
3