Sharp UX-460 All in One Printer User Manual


 
Comments:
Your fax will not accept the signal to begin reception (5 ) if a document is
loaded in its feeder.
If you have set Option Setting 10 to NO and hear a fax tone when you answer
the extension phone, you must press 5, , and if you are on a touch-tone
phone, or walk over to the fax, pick up the handset, and press the
START/MEMORY key if you are on a pulse dial phone.
The code used to activate fax reception from a touch-tone extension phone
(5 ) can be changed if desired. See Option Setting 5 (Tel/Fax Remote
Number) in Chapter 8, Option Settings.
2 in 1 Print
To save paper, you can have the size of your incoming faxes reduced
by 55%. This will allow you to receive, for example, a 2-page
document on one page (note that this may not be possible if the
document pages are longer than your printing paper). To turn on this
function, follow the steps below.
1
Press these keys:
FUNCTION
6
The display will show:
2 IN 1 PRINT
2
Press 1 to turn on the function, or 2 to turn it off.
YES NO
or
1 2
The display will show:
PRINT CONTRAST
3
Press the STOP key.
STOP
4. Receiving
Documents
Receiving Documents
79