Sharp UX-CC500 All in One Printer User Manual


 
Transfer Function
60
Recording the transfer message
The transfer message plays when you answer the telephone, and informs you
that the call is a transfer call. The following is an example:
Hello. This is a transfer call for (YOUR NAME). Enter your remote code
number now.
Note: Do not lift the handset until Step 3 below.
1 Press once and once.
2 Press once.
If you have already recorded a message, you can press to listen to the
message, or press to delete the message.
3 Lift the handset.
4 Press and speak into the handset to record the message.
The transfer message can be up to 15 seconds long. While recording, the
display will show the time left to record.
5 When finished, replace the handset or press .
REC/
MEMO
PLAY
DELETE
START/MEMORY
STOP
Display:
OGM (TRANSFER)
Checking or erasing the transfer message
To check or erase the transfer message, follow Steps 1 and 2 of the above
procedure, and then press to check the message, or to erase the
message.
PLAY
DELETE