Sharp UX-CC500 All in One Printer User Manual


 
Sending a Fax From Memory
81
4. Sending
Faxes
Sending a Fax From Memory
You can scan a document into the faxs memory and send the document from
memory. This increases transmission speed and allows you to send a fax to
multiple destinations in a single operation. After transmission, the document is
automatically cleared from memory.
Note: If a power failure occurs while sending a fax from memory, you will need
to repeat the operation.
Broadcasting (sending a fax to multiple destinations)
This function allows you to send the same fax to as many as 20 different
destinations in just one operation.
When sending to multiple destinations, only auto-dial numbers can be used
to dial the numbers of the receiving machines.
1 Load the document(s).
If desired, press to set the
resolution and/or contrast.
2 Press .
3 Press (or ) until the name of the destination appears in the
display (if no name was stored, the number will appear).
4 Press to select the destination.
5 Repeat Steps 3 and 4 for each of the other destinations to which you
wish to send the fax (maximum of 20).
To check your selected destinations, press to scroll through them. To
delete a destination, scroll to the destination and then press .
RESOLUTION/
RECEPTION MODE
START/MEMORY
STOP