Filter
Top Products
Loading the Imaging Film
15
1. Installation
11
Rotate the large gear toward you
until the film is taut.
12
Close the print compartment cover
(press down on both sides to make
sure it clicks into place), and then
close the operation panel.
Click!
9
Cut the band that holds the two
spools together. Unroll the film
slightly and insert the small gears
into their holders.
10
Turn the cartridge over, grasp the
handle, and insert the cartridge into
the print compartment.
8
Insert the large gear into the large
holder on the imaging film cartridge
(make sure it clicks into place), and
then insert the small gear on the
other end of the spool into its
holder.
all_ux340lm.book Page 15 Tuesday, November 28, 2000 3:09 PM