Filter
Top Products
Setting Up and Using OpenLCR
34
What to do if you cannot
connect to OpenLCR
If you are unable to connect to
OpenLCR when you use the
OpenLCR key to register or manually
download data, it is likely that the
phone number that the fax machine
dials when you press the OpenLCR
key is no longer correct.
To obtain the correct phone number,
call OpenLCR at 970-206-1207, and
then program the number into the fax
machine as explained on the following
page.
Note: The number that you will obtain
is the number for manually
downloading rate data (dialed by
pressing the OpenLCR key and 2).
When you manually download the
rate data, the new numbers for
registering (dialed by pressing the
OpenLCR key and 1, 3, or 5) will also
be programmed in your fax machine.
1
Press these keys:
7
FUNCTION
CENTER # MODE
2
Press 1 (SET) to set the new phone
number.
Note: If you want to restore the
factory-set number, press 2 for
CLEAR and then go to Step 4.
3
Press the number keys to enter the
new phone number.
4
Press the START/MEMORY key to
store the number.
START/MEMORY
5
Press the STOP key to return to the
date and time display.
STOP
6
Press the OpenLCR key and 2 to
download new rate data.
2
OpenLCR
•
If you have not yet registered with
OpenLCR, your fax will receive new
phone numbers that will allow you
to connect to OpenLCR. Register
using one of the procedures
described at the beginning of this
chapter.
Note: The following settings are not
required as of the printing
of this manual. OpenLCR will
inform you through its Web site
(www.OpenLCR.com) if the settings
become necessary in the future.
all_ux340lm.book Page 34 Tuesday, November 28, 2000 3:09 PM