Filter
Top Products
Flash Select Setting for PBX
34
Flash Select Setting for PBX
Note: This setting is normally only used in Germany. In other countries, you
can try changing the setting if you encounter difficulty with the default setting.
If your fax machine is connected to a PBX and the PBX uses the “Flash”
method to connect to an outside line, you must select the appropriate Flash
Select setting depending on whether your PBX line is a normal telephone line
or an ISDN line (or other high-speed line).
1 Press once and twice.
2 Press once and 4 times.
3 Press once.
4 Select (SHORT TIME) if your PBX
line is a normal telephone line.
Select (LONG TIME) if your PBX
line is an ISDN line (or other high-
speed line).
5 Press to return to the date and time display.
FUNKTION
1
2
STOP
Display:
The display briefly shows
your selection, then:
OPTION SETTING
FLASH SELECT
FAX SIGNAL RX
1: SHORT TIME
all.book Page 34 Monday, September 1, 2003 3:46 PM