Sharp XE-A177 Cash Register User Manual


  Open as PDF
of 136
 
124
Replacing the Paper Roll
■
Recordingpaperspecications
BesuretousepaperrollsspeciedbySHARP.
Theuseofanyotherpaperrollsthanspeciedcouldcausepaperjamming,resultinginregistermalfunction.
Paperspecication
Paper width: 57.5 ± 0.5 mm
Max. outside diameter: 80 mm
Quality: Highquality(0.06to0.08mmthickness)
•Be sure to set a paper roll prior to using your machine, otherwise it may cause a malfunction.
Install the paper roll in the printer. Be careful then to set the roll and cut the paper end correctly.
To the printer
Incorrect
To the printer
Correct
Correct Incorrect
(How to set the paper roll) (How to cut the paper end)
■
Installing the Paper Roll
Always install the paper roll even when you set the register for not printing receipt in REG mode.
1.
Remove the printer cover.
2.
Lift up the print roller arm.
3.
Set the paper correctly in the paper roll cradle.
NOTE
Before placing a new paper roll in the paper
roll cradle, cut off the pasted (taped) part of the
paperandconrmthatthecutendofthepaperis
straight.
Print roller arm
 previous next