Sharp XE-A177 Cash Register User Manual


  Open as PDF
of 136
 
97
■
Zero skip
You can program whether or not to skip “0” in each report.
Procedure
Program each item as follows:
•DEPARTMENT (Use the selective entry)
SKIP: Skips those data that are “0” in the department
report.
NOT SKIP: Does not skip those data that are “0” in the
department report.
•TRANSACTION (Use the selective entry)
SKIP: Skips those data that are “0” in the transaction
report.
NOT SKIP: Does not skip those data that are “0” in the
transaction report.
•PLU (Use the selective entry)
SKIP: Skips those data that are “0” in the PLU report.
NOT SKIP: Does not skip those data that are “0” in the PLU report.
•CLERK (Use the selective entry)
SKIP: Skips those data that are “0” in the clerk report.
NOT SKIP: Does not skip those data that are “0” in the clerk report.
•HOURLY(Usetheselectiveentry)
SKIP: Skips those data that are “0” in the hourly report.
NOT SKIP: Does not skip those data that are “0” in the hourly report.
■
Print select
You can program whether or not to print the item on the report.
Procedure
Program each item as follows:
The screen continues.
•SEPARATOR LINE (Use the selective entry)
YES: Print the separate line on the report.
NO: Not to print the separate line on the report.
•Z COUNTER (Use the selective entry)
YES: Print the Z counter on the Z report.
NO: Not to print the Z counter on the Z report.
•GT1ONZ(Usetheselectiveentry)
YES: Print GT1 on the Z report.
NO: Not to print GT1 on the Z report.
•GT2ONZ(Usetheselectiveentry)
YES: Print GT2 on the Z report.
NO: Not to print GT2 on the Z report.
•GT3ONZ(Usetheselectiveentry)
YES: Print GT3 on the Z report.
NO: Not to print GT3 on the Z report.
•BALGTONZ(Usetheselectiveentry)forXE-A217W/XE-A217Bonly
YES: Print the balance GT on the Z report.
NO: Not to print the balance GT on the Z report.
•TRGTONZ(Usetheselectiveentry)
YES: Print the training GT on the Z report.
NO: Not to print the training GT on the Z report.
 previous next