Filter
Top Products
28
If a department is not programmed to allow the entry of preset unit prices in functional
programming, the department is automatically changed to allow the entry of preset unit prices by
this programming entry.
The PLU function allows speedy key entries whereby a price is automatically called up when a code is entered.
The subdepartment is a kind of “open PLU”, which requires you to enter a price after the PLU code is entered.
By default, PLU/subdepartment setting for 1 through 200 codes are possible, and can extend to 1200. To
extend the number, please refer to “EJ memory type” on page 40.
Unit price and associated department assignment
*2: For a subdepartment, set the limit amount of unit price entry.
To program the following PLU code, start from entering a unit price or an associated department code without
pressing the
A
key.
To program another PLU code, start from the beginning without pressing the
A
key.
To delete a PLU code, use the following sequence:
PLU code
pv
To delete the following PLU code
To delete another PLU code
A
PLU code
Unit price
Associated dept.
1
p
125
#
A
PrintKey operation example
PLU (Price Look-Up) and Subdepartment Programming
2
Unit price
1000
!
A
PrintKey operation example
PLU code
*1: To assign departments 17 through 32, press the department shift key.
p
To program zero
Unit price
(max. six digits)
A
D
*
1
Associated
Dept. key
*
2
PLU code
When the associated department is department 33-50:
p
ds
To program zero
Associated
dept. code
(33 to 50)
Unit price
(max. six digits)
A
*
2
A201_3 FOR THE MANAGER 01.11.11 10:22 AM Page 28