Filter
Top Products
41
Temporary EJ printing during transaction
• If selecting “enable”, you can print journal data of a current transaction recorded in EJ memory by pressing
the
R
key during the transaction. To realize this function completely, the cash register must be
programmed to print the receipt and set the Receipt ON/OFF function to OFF.
PGM mode operation records type
• For data of program reading operation, the header information only is printed.
For X/Z reports, the header information only is printed.
(Receipt sample for Header Information only)
Action when EJ memory area is full
• By default, when the memory for EJ becomes nearly full, the cash register shows decimal points at the 8th
and 9th positions of the display (EJ memory nearly full message), and the cash register keeps storing new
data while erasing the oldest data. When “0” is selected, the cash register will not show EJ memory nearly
full message. When “2” is selected, the cash register shows EJ memory nearly full message and when the
memory gets full, the cash register locks the sales/data entry with a display of the memory full message
“ ”. You must issue an EJ report (Z1 report) at this time.
The cash register provides various detailed functions listed below.
• Function selection for miscellaneous keys
• Print format
• Receipt print format
• Others
For this programming, the job code entry style is applied. You can continue programming until you press the
A
key for the programming described in this section. To continue programming, repeat from a job code
entry.
*1 Enter job code using numeric keys specified in each section below.
*2 Data entry details are listed on each table in each section below. An asterisk is entered for factory setting.
Example: When programming for job code 5 as ABCDEFGH: 00000100.
s
5
@
00000100
sA
PrintKey operation example
s @
*
2
ABCDEFGH*
1
Job code
As
To set “00000000”
Various Function Selection Programming 1
3
s
68
@
00100002
sA
PrintKey operation example
A201_3 FOR THE MANAGER 01.11.11 10:22 AM Page 41