Filter
Top Products
39
Training mode text (12 digits)
For every receipts issued in the training mode, **TRAINING** is printed by default. When you want to change
the text, follow the procedure below.
The programmed text is printed in double-size characaters on the receipts issued in the training
mode.
s
87
P
SS
TRAINING
SS
sA
PrintKey operation example
s P87
Character keys
(max. 12 digits)
As
To keep the current setting
ADVANCED FUNCTION PROGRAMMING
Register number and consecutive number are printed on every receipt or journal.
When your store has two or more registers, it is practical to set separate register numbers for identification. The
consecutive number is increased by one each time a receipt or journal is issued.
For consecutive number programming, enter a number (max. 4 digits) that is one less than the desired starting
number.
Register number
Setting consecutive numbers
Consecutive
number
s
2
@
1000
sA
PrintKey operation example
Register number
s
1
@
123456
sA
PrintKey operation example
Register Number and Consecutive Number Programming
1
1s
@
s A
Register number (one to six digits)
To set the register number “0”
2s
@
s A
A number (one to four digits) that is one
less than the desired starting number
To begin the count from 0001
A201_3 FOR THE MANAGER 01.11.11 10:22 AM Page 39