Filter
Top Products
14
(2) TEXT
Type a department name of up to 16 letters in the textbox. The default value is DEPT.XX (XX is a department
code).
Notice
Use letters only that can be displayed or printed by the cash register. For appropriate letters, refer to
page 47 in the Instruction Manual of XE-A207 and XE-A23S.
(3) PRICE
Input a unit price in the textbox, which can range from 0 to 999999.99. The default value is zero.
• MINUS
If you check here, a negative sign is added to the unit price in the list of department data, and the price is
calculated as a negative number.
The box is not checked in the default setting.
(4) TAXABLE
Check “Tax1,” “Tax2,” “Tax3” or “Tax4.”
(5) PROGRAM
• Amount Entry Type
Check "OPEN"* and/or "PRESET"* to select how to register. The “OPEN” checkbox is selected in the default
setting. If you choose both "OPEN" and "PRESET," you can input amount in either way. If you do not choose
either of them, you cannot input the department.
• Sales Type
Select “NORMAL”* or “SICS”* (single item cash sales) as a sales type. The default value is “NORMAL.”
• HALO* (high amount lockout)
Input HALO in the textbox, which can range from 0 to 999999.99. The default value is 999999.99.
*Note
For details of register settings refer to the Instruction Manual of XE-A207 and XE-A23S.
(6) DEPT CODE
The code of a selected department is displayed.
You can see another department data with the following procedure.
1. Click inside of the DEPT CODE textbox.
The department code input dialog appears.
2. Input the code of a department you want to see in the textbox.
Click [OK].
Data with the selected code are shown on the department screen.
You can also change the department code selection with the [<] button or [>] button.
(7) Get from SD
Click this button to read the department setting data from an SD memory card.
(8) Send to SD
1
2
3