Filter
Top Products
46
Signal Adjustment (“SIG-ADJ” Menu)
H-Pos
V-Pos
Phase
Clock
Reset
Resolution
Auto Sync
0
0
0
0
Auto
Off
Picture Video SCR-ADJ PRJ-ADJSIG-ADJ
MENU = END
SEL./ADJ. SEL.
Menu operation n Page 41
3
Auto Sync (Auto Sync
Adjustment)
Selectable
items
Description
On Auto Sync adjustment will occur when
the projector is turned on or when the
input signals are switched, when
connected to a computer.
Off Auto Sync adjustment is not
automatically performed.
Auto Sync adjustment is also performed by
pressing AUTO SYNC.
The Auto Sync adjustment may take some
time to complete, depending on the image of
the computer connected to the projector.
When the optimum image cannot be achieved
with Auto Sync adjustment, use manual
adjustments.
•
•
•
Note
1
Adjusting the
Computer Image
If the optimum image cannot be obtained with
Auto Sync adjustment, use the SIG-ADJ function.
Selectable
items
Description
H-Pos Centers the on-screen image by
moving it to the left or right.
V-Pos Centers the on-screen image by
moving it up or down.
Phase Adjusts horizontal noise (similar to
tracking on your VCR).
Clock Adjusts vertical noise.
To reset all adjustment items, select “Reset”
and press
(ENTER).
The adjustable range of “H-Pos” (H-Position)
and “V-Pos” (V-Position) may vary depending
on the screen resolution of the computer.
•
•
Note
2
Setting the Resolution
Selectable
items
Description
Auto Input signal resolution is automatically
recognized.
Wide Set when the Wide signal is received.
4:3 Set when the 4:3 signal is received.